Metal Polish

Everyone is seeking a metal polish that works quickly, is simple to use, and isn’t expensive. Quick Sheen is that unicorn metal polish that you’re looking for. There have been many tests, applications, hours, blood, sweat, tears, and money that our research and development team has put into our final product line. In our Quick Sheen metal polish, you’ll find that it’s been designed to work on all metals. Let’s say that again. All metals. aluminum, chrome, stainless steel, magnesium, billet aluminum, gold silver, copper, pewter, and brass. You can even clean your precious jewelry or heirlooms without fear of a problem. We simply say that as long as our metal polish formula can actually touch the metal surface – it will work.

What’s In Quick Sheen’s Metal Polish Formula?

Quick Sheen’s unknown trade-secret is using a perfectly formulated non-acidic and non-abrasive agent that produces a simple chemical reaction which harmlessly removes metal oxidation, without the use of expensive and harmful petroleum as well as harsh abrasives that will scratch, pit, and further harm metal surfaces. Most other companies fall victim to using these two ingredients. What’s important to Quick Sheen’s success is the fact that our polishing system is water based. That’s right. Completely harmless yet perfectly mixed with over 30 other proprietary and advanced ingredients and agents. We can boast that Quick Sheen uses no abrasives, no petroleum solvents, and creates a desirable high gloss on metal surfaces that lasts for at least 6 months!

What’s Does Quick Sheen’s Metal Polish Formula Do?

We’ve taken an already amazing technology in the metal polishing world and enhanced it even further. Our metal polish formula will not only dissolve oxidation and contamination immediately on contact, but it also will apply a micro level clear coat sealant which will act as an agent that fills in micro-scratches and abrasions. We know that a smoother surface is more glossy. It one simple application, our formula will not only clean the surface and polish it, but will additionally protect it. Our protection will last for up to 6 months!

Quick Sheen’s Metal Polish and Sealer Formula Easily Removes and Protects Against the Following (and then some)…

  • Rust
  • Brake Dust
  • Oxidation (of any kind)
  • Pitting
  • Scratching
  • Water Spots
  • Tarnishing
  • Sun Spots
  • Bluing/Yellowing – Discoloration Due to Heat
  • Magnesium Chloride
  • Dirt and Mud Stains
  • Tar Tarnish
  • Chrome and Stainless Steel Fading
  • Various Types of Corrosion (see below)

Below Is a Common List of Metals Most of Our Clients Polish With Quick Sheen Metal Polish

  • Aluminum
  • Chrome
  • Stainless Steel
  • Nickel
  • Pewter
  • Magnesium
  • Billet Aluminum
  • Gold
  • Silver
  • Platinum
  • Copper
  • Brass

Some of The Many Benefits of Using Quick Sheen

Heat Protection and Resistance

There are a lot of good reasons why we brought Quick Sheen to market. We call these reason the benefits of using our metal polish. For starters, our polish works well under heat. Our polish and sealer will protect your metal surface (engine parts) in excess of 600 degrees Fahrenheit. This heat resistance makes our formula a perfect solution to clean and protect your chrome valve head covers, your aluminum radiator top, your stainless steel headers, or chrome plated exhaust pipes and tips. Help your whip get show ready with Quick Sheen.

Keep Water Spots From Forming

There are few things more frustrating than having a freshly polished metal surface soiled by water spots. We know! It takes work to get your chrome wheels looking perfect. A little rain and wind will ruin that in seconds. If left long enough, those water spots become difficult to remove. Not only being able to make your metal surface look perfect, but also keeping it perfect, is one huge benefit of Quick Sheen.

Fill In and Remove Scratches and Minor Abrasions

We all know that the smoother your metal surface is, the more glossy it will look. You’ve seen those surfaces that are shiny, but also have lots of hairline scratches. Frustrating, right? Especially if you’re a perfectionist. Our formula will contains an agent that will lightly coat the surface of your metal with a miso-layer clear coat. This clear coat layer will find low points in your metal surface and slightly fill them in with each application. The more you use Quick Sheen metal polish, the less you’ll see those scratches and abrasions. They disappear over time as our formula goes to work.

Major Metal Fabrication Companies and Metal Parts Manufacturers Use and Trust Quick Sheen to Remove Scratches From Their Products

In fact, we have many large manufacturers and metal distribution companies who buy our metal polish formula to use on their products as a final touch before sending them out to their customers. These companies range from aftermarket wheel manufacturers to metal fabricators and aftermarket performance auto parts companies. They have all found value in the scratch and abrasion treatment that Quick Sheen offers for their products. This ensures their products look the very best they can after manufacturing before being sent to their customers. First impressions are the most important.

Literally No Buffing Required

Ok, this is probably our (and hopefully yours too) most favorite part of our product. No buffing needed. Literally. Because we’ve developed a non-acidic, non-petroleum, non-abrasive chemical reaction, the metal polish does all the work. Not you. You just have to wipe on the polish, make sure it’s touching the metal surface, and then wipe it off. Quick Sheen works each and every time. Because there’s no petroleum (like almost all other brands of metal polish contain) there will not be a greasy residue after your use. We hate the break the news, but Quick Sheen has become many other companies and professional detail shop’s secret. Sorry. Not sorry. 🙂

Quick Sheen’s Money Back Guarantee

Quick Sheen maintains the top money back guarantee that you can find. As this is being written, we have yet to ever have a complaint, problem, or request for a refund of our products. If you have any kind of concern or issue that you feel our metal polish formula doesn’t resolve, feel free to ask for a complete refund. We’ll happily refund the full price you paid for the product(s) you purchased or ordered from Quick Sheen.

Quick Sheen’s Rise to the Success You See

We’ve heard people’s story over and over about their frustrations with polishing metal. Everyone is tired of constantly repolishing their metal. Whether it’s because of a dust storm, sun spots, or rain, the frustrations were real. Our thirst for knowledge and a solution to end these frustrations lead us to thousands of tests to produce the formula you see now. Current well-known name brands are using a polish formula that hasn’t changed much in the last 20-50 years. We knew there had to be a better way. After years of work, thousands of tests, thousands of man-hours, and many different formula iterations, we’ve perfected our metal polish. There is absolutely no doubt in our minds and the minds of literally tens of thousands of customers that Quick Sheen is the very single best metal polish on the market today. Quick Sheen has become one of the fastest selling car and metal polishes in the country today.

Have You Tried the Best Metal Polish Available, Quick Sheen, Yet?

We invite you to order our product, give Quick Sheen a try, by clicking on the button below. We would like the opportunity to impress you with what Quick Sheen total metal care system has to offer. And, after reading this page about our metal polish, what do you have to lose? Your friends, neighbors, and audience will be impressed too! It’s always a good feeling when you know that people are looking your direction because you have that good looking car, motorcycle, boat, or trailer that everyone wants.